Busbar welding machine
Function:
The cell induction welding head is used to interconnect the bus bars at the head, middle and tail of the outgoing line type module; It has the function of feeding tape with coiled bus bar and bending u-and L-type leads upward.
Process flow:
The loading conveyer splicing and correctionTransfer position of the loading conveyerThe manipulator grips the cell string to the welding position,The calibration of cell string is completed,At the same time, the belt making of the bus bar is completedweldingThe manipulator grips the cell string to the glass of unloading conveyerProduct flow to downstream equipment
Project |
Specification |
Equipment name/specification |
Busbar welding machine/DH-180S
|
Tact time |
20 sec/Panel
|
General equipment parameters |
● Power supply:three-phase 380V 50/60Hz;
● Power:peak:30kw;average :20kw ● Air source:positive pressure 0.6~0.8MPa,negative pressure about-70KPa;(provided by customer) |
Efficency |
>98.0%,excluding equipment maintenance time (actual effcency time- stop time/actual effcency time)×100 %
|
Solar cell Specification |
● Size:156mm-220mm,number of wires:5BB-12BB;
● Factory fitted as standard; |
Component Specification |
● 6 strings×10 half strings×2 & 6 strings×12 half strings×2 & 6strings×13half strings×2 |
Glass specification |
Width:980-1400mm
Length:1630-2500mm |
Cell string correction accuracy |
≤ ±0.25mm
|